热门文档
- 2024-01-19 21:03:34 GB 15558.2-2005
- 2024-01-31 21:34:39 DB11 367-2006 地下室防水施工技术规程
- 2024-01-31 21:34:39 DB11 971-2013 重点建设工程施工现场治安防范系统规范
- 2024-01-19 21:03:34 GB 12514.2-2006 消防接口 第2部分内扣式消防接口型式和基本参数
- 2024-01-27 16:07:00 JG∕T 5115-1999 钢筋网成型机
- 2024-02-29 16:45:21 DB33∕T 1137-2017 建筑反射隔热涂料应用技术规程
- 2024-01-18 16:14:29 DB∕T 29-240-2016 天津市保温装饰板外墙外保温系统技术规程
- 2024-02-29 20:00:40 DB34∕T 2463-2015 公路工程混凝土抗压强度检测技术规程 超声回弹综合法
- 2024-02-28 23:22:33 DB22∕T 3430-2023 公路建设项目水土保持技术规范
- 2024-01-19 21:03:34 GB 11949-1989 陶瓷砖釉面抗龟裂试验方法
- 2024-01-31 19:55:33 GB 18588-2001混凝土外加剂中释放氨的限量
- 2024-01-27 17:25:47 T∕CBCSA 30-2020 陶瓷砖试验方法 抗热震性的测定
以下内容来自OCR识别,不保证本文准确性。完整文件请预览PDF
BRITISH STANDARD
BS476:Part7:1997
Fire tests on building materials and structures
Part 7. Method of test to determine the classification of the surface spread of flame of products
ICS 13.220.50
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
BS476: Part 7: 1997 Committees responsible for this British Standard
The preparation of this British Standard was entrusted by Technical Committee FSH/21, Reaction to fire tests, upon which the following bodies were represented:
- Association of Building Component Manufacturers
- Association of Roof Light Manufacturers
- Autoclaved Aerated Concrete Products Association
- British Carpet Manufacturers Association Ltd.
- British Iron and Steel Producers Association
- British Plastics Federation
- British Railways Board
- British Resilient Flooring Manufacturers Association
- British Rigid Urethane Foam Manufacturers' Association
- British Wood Preserving and Damp-proofing Association
- Chemical Industries Association
- Chief and Assistant Chief Fire Officers Association
- Department of Health
- Department of the Environment (Building Research Establishment)
- Department of the Environment (Property and Buildings Directorate)
- Department of the Environment for Northern Ireland
- Eurisol (UK Mineral Wool Association)
- European Phenolic Foam Association
- Fibre Cement Manufacturers Association Limited
- Flat Glass Manufacturers' Association
- GAMBICA (BEAMA Ltd.)
- Gypsum Products Development Association
- Home Office
- Institute of Fire Safety
- Institution of Fire Engineers
- London Fire and Civil Defence Authority
- Loss Prevention Council
- National Council of Building Material Producers
- National GRP Construction and Engineering Federation
- Polyethylene Foam Insulation Association
- Queen Mary and Westfield College
- RAPRA Technology Ltd.
- Specialist Ceilings and Interiors Association Ltd
- Thermal Insulation Manufacturers and Suppliers Association (TIMSA)
- Timber Research and Development Association
- Warrington Fire Research Centre
- Wood Panel Industries Federation
- Wood Wool Slab Manufacturers Association
This British Standard, having been prepared under the direction of the Consumer Co-opted members Board, was published under the authority of the Standards Board and comes into effect on 15 January 1997.
Amendments issued since publication
First published as BS 476 December 1932
Amd. No. Date Text affected
- Second edition July 1953
- First published as BS 476: Part 7 February 1971
- Second edition June 1987
- Third edition January 1997
The following BSI references relate to the work on this standard:
- Committee reference FSH/21
- Draft for comment 94/307806 DC
- ISBN 0580262987
BS476: Part 7: 1997 Contents
Page
- Foreword
- Method
- Scope
- Normative references
- Definitions
- Suitability of a product for testing
- Test specimens
- Apparatus
- Ancillary equipment
- Calibration
- Test procedure
- Recording of results
- Classification of results
- Report
Annexes
A (informative) Guidance for operators
B (informative) Effect of thermal characteristics on the performance of assemblies
C (informative) Validation of test method
Tables
Irradiance along horizontal reference line on the calibration board
Classification of spread of flame
Figures
- General arrangement of a typical apparatus
- Typical design of specimen holder
- Position of specimen holder in relation to radiation panel
- Position of pilot burner in relation to surface of specimen
- Typical diagrammatic arrangement of gas and air supply
- Calibration board
- Reference lines to assist surface spread of flame classification
List of references (Inside back cover)
```
请如实的对该文档进行评分-
-
-
-
-
0 分