以下内容来自OCR识别，不保证本文准确性。完整文件请预览PDF

BSI BS*:952PART*280■162466900236186■BS952:Pat2:1980

UDC666.15:698.3:0014

Glass for glazing

Part 2.Terminology for work on glass

Verre pour la pose des vitres

Partie 2.Terminologie relative au travail de verre

Glas fur Beglasungszwecke

Teil 2.Terminologie fur Glasbearbeitung

Contents

Page

Foreword

Inside front cover

Table

Cooperating organizations

Back cover

1.Edge work and bevelling

2.Terminology

Figures

1.Scope

1.Types of brilliant cut

2.Cutting processes

3.Obscuring processes

2.Finger slot

3.Standard bends for glass

4.Silvering

5.Gilding

Index

6.Staining or painting,and firing

7.Bending

8.Foreword

The first edition of BS 952 was published in 1941,These glasses are intended for use in accordance with the revised in 1953,and again in 1964 under the authority of recommendations of CP 152 Glazing and fixing of glass the Glass Industry Standards Committee.for buildings'.The present revision,now under the direction of the Elements and Components (of Diverse Materials) for general use relating to the cutting,working and decorating Buildings Standards Committee,has been published in two separate Parts of which this is Part 2.Part 1 'Classification'It is intended to publish,in due course,a Part 3,which will was published in 1978.include a more detailed technical specification for glass in Part 1 classifies soda-lime-silica glasses for building building in line with an EEC Directive currently being purposes and gives details of nominal thickness, prepared.maximum sizes,approximate weights and tolerances.

Copyright by the British Standards Institution

Fri May191332:412000