以下内容来自OCR识别，不保证本文准确性。完整文件请预览PDF

BSI BS 5212: Part 2: 1990

Cold applied joint sealant systems for concrete pavements

Part 2 - Code of practice for the application and use of joint sealants

Matériaux d'étanchéité appliqués à froid pour pavages en béton

Bodenbeläge aus Beton

Partie 2 - Code de bonne pratique pour Teil 2 - Anwendung l'application et l'utiilisation des matériaux d'étanchéité

STANDARDS

Copyright by the British Standards Institution

Mon Jul 24 14:15:34 2000

BSI BS 5212: Part 2: 1990

Committees responsible for this British Standard

The preparation of this British Standard was entrusted by the Road Engineering Standards Policy Committee (RDB/-) to Technical Committee RDB/10, upon which the following bodies were represented:

• Association of Consulting Scientists
• British Adhesives and Sealants Association
• British Airports Authority
• British Tar Industry Association
• County Surveyors' Society
• Department of the Environment (Property Services Agency)
• Department of Transport
• Department of Transport (Transport and Road Research Laboratory)
• Institution of Civil Engineers
• Institution of Highways and Transportation
• Coopted members

This British Standard, having been prepared under the direction of the Road Engineering Standards Policy Committee, was published under the authority of the Board of BSI and comes into effect on 30 June 1990

Amendments issued since publication

Amd. No. Date Text affected

Second edition, as BS 5212 Part 2, June 1990

The following BSI references relate to the work on this standard:

• Committee reference RDB/10
• Draft for comment 87/11488 DC
• ISBN 0580183580

Copyright by the British Standards Institution

Mon Jul 24 14:15:45 2000