请选择 进入手机版 | 继续访问电脑版
首页建筑建材类标准规范国家标准BS EN 1015-3-1999 Methods of test for mortar for masonry - Determination of consistence of fresh mortar (by flow table)
建筑资料

文档

40

关注

0

好评

0
PDF

BS EN 1015-3-1999 Methods of test for mortar for masonry - Determination of consistence of fresh mortar (by flow table)

阅读 985 下载 0 大小 612.63K 总页数 10 页 2024-01-25 分享
价格: 2 积分
下载文档
/ 10
全屏查看
BS EN 1015-3-1999 Methods of test for mortar for masonry - Determination of consistence of fresh mortar (by flow table)
还有 10 页未读 ,您可以 继续阅读 或 下载文档
文档介绍

以下内容来自OCR识别,不保证本文准确性。完整文件请预览PDF

BRITISH STANDARD BS EN 1015-3:1999 Incorporating Amendment No. I

Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)

The European Standard EN 1015-3:1999, with the incorporation of amendment A1:2004 has the status of a British Standard ICS 91.100.10

NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW

British Standards BSEN 1015-3:1999

National foreword

This British Standard is the official English language version of EN 1015-3:1999, including amendment A1:2004. It is included in a package of standards related to mortar for masonry declared by CEN/TC 125. The package of standards will supersede BS 4551-1:1998, which will be withdrawn on 30 September 2000 if all the European Standards included in the package are available.

The UK participation in its preparation was entrusted by Technical Committee B/519, Masonry and associated testing, to Subcommittee B/519/2, Mortar, which has the responsibility to:

  • aid enquirers to understand the text;
  • present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
  • monitor related international and European developments and promulgate them in the UK.

A list of organizations represented on this subcommittee can be obtained on request to its secretary.

Cross-references

The British Standards which implement international or European publications referred to in this document may be found in the BS Catalogue under the section entitled "International Standards Correspondence Index", or by using the "Search" facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.

Summary of pages

This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. This British Standard, having been prepared under the direction of the Sector Committee for Building and Civil Engineering, was Amendments issued since publication published under the authority of the Standards Committee iN0 and comes into effect on Amd. No. Date Comments.

  • 15 June 1999
  • 15Amd. 17 November 2004 Correction to 8th paragraph of Annex A

ISBN 0580307468

```

1、本文档共计 10 页,下载后文档不带水印,支持完整阅读内容或进行编辑。
2、当您付费下载文档后,您只拥有了使用权限,并不意味着购买了版权,文档只能用于自身使用,不得用于其他商业用途(如 [转卖]进行直接盈利或[编辑后售卖]进行间接盈利)。
3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。
4、如文档内容存在违规,或者侵犯商业秘密、侵犯著作权等,请点击“违规举报”。
文档评分
    请如实的对该文档进行评分
  • 0
发表评论