以下内容来自OCR识别，不保证本文准确性。完整文件请预览PDF

BRITISH STANDARD

BS EN10223-3:1998

Steel wire and wire products for fences

Part 3: Hexagonal steel wire netting for engineering purposes

The European Standard EN 10223-3:1997 has the status of a British Standard

ICS 77.140.65

NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW

BS EN10223-3:1998

National foreword

This British Standard is the English language version of EN 10223-3:1997 published by the European Committee for Standardization (CEN).

The UK participation in its preparation was entrusted to Technical Committee ISE/26, Steel wire, which has the responsibility to:

• aid enquirers to understand the text
• present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed
• monitor related international and European developments and promulgate them in the UK

A list of organizations represented on this committee can be obtained on request to its secretary.

Cross-references

The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled "International Standards Correspondence Index", or by using the "Find" facility of the BSI Standards Electronic Catalogue.

A British Standard does not purport to include all the necessary provisions of a contract.

Users of British Standards are responsible for their correct application.

Summary of pages

This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover.

This British Standard

having Amendments issued since publication been prepared under the direction of the Engineering Amd. No. Date Text affected Sector Board, was published under the authority of the Standards Board and comes into effect on 15 April 1908.

BSI 1908 ISBN 0580294129