以下内容来自OCR识别，不保证本文准确性。完整文件请预览PDF

BRITISH STANDARD

BS EN 12385-7:2002

Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts

The European Standard EN 12385-7:2002 has the status of a British Standard

NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW

British Standards

BSEN 12385-7:2002

National foreword

This British Standard is the official English language version of EN 12385-7:2002. The UK participation in its preparation was entrusted to Technical Committee MHE/2, Wire ropes, which has the responsibility to:

• aid enquirers to understand the text;
• present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
• monitor related international and European developments and promulgate them in the UK.

A list of organizations represented on this committee can be obtained on request to its secretary.

Cross-references

The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled "International Standards Correspondence Index", or by using the "Search" facility of the BSI Electronic Catalogue or of British Standards Online.

This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.

This British Standard, having Summary of pages been prepared under the direction of the Engineering Sector Policy and Strategy pages 2 to 14, an inside back cover and a back cover.Committee, was published under the authority of the Standards Policy and Strategy Committee on 30 October 2002.

Amendments issued since publication

Amd.No. Date Comments

BSI 30 October 2002 ISBN 058040658