请选择 进入手机版 | 继续访问电脑版
首页建筑建材类标准规范国家标准BS EN 12020-1-2001铝及铝合金.挤制合金EN AW-6060 and EN AW-6063精密型材.检验和交货技术条件
工程规范库

文档

466

关注

0

好评

0
PDF

BS EN 12020-1-2001铝及铝合金.挤制合金EN AW-6060 and EN AW-6063精密型材.检验和交货技术条件

阅读 648 下载 0 大小 611.79K 总页数 14 页 2024-02-16 分享
价格: 2 积分
下载文档
/ 14
全屏查看
BS EN 12020-1-2001铝及铝合金.挤制合金EN AW-6060 and EN AW-6063精密型材.检验和交货技术条件
还有 14 页未读 ,您可以 继续阅读 或 下载文档
文档介绍

以下内容来自OCR识别,不保证本文准确性。完整文件请预览PDF

BRITISH STANDARD

BS EN 12020-1:2001

Aluminium and aluminium alloys Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery

The European Standard EN 12020-1:2001 has the status of a British Standard 1Cs77.150.10

NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW

BS EN 12020-1:2001 National foreword

This British Standard is the official English language version of EN 12020-1:2001. Together with the standards listed in the following table, it supersedes BS 1474:1987 which is withdrawn. This part of BS EN 12020 is published together with:-

  • BS EN 755-9, Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form;
  • BS EN 12020-2, Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form.

Table of implemented European Standards

The following table gives the full list of implemented European Standards which supersede BS 1474:1987.

Superseded British Standard Superseding European Standards
BS 1474:1987 BS EN515:1993, BS EN573-3:1995, BS EN573-4:1995, BS EN755-1:1997, BS EN755-2:1997, BS EN755-3:1996, BS EN755-4:1996, BS EN755-5:1996, BS EN755-6:1996, BS EN755-7:1998, BS EN755-8:1998, BS EN755-9:2001, BS EN12020-1:2001, BS EN12020-2:2001

UK Participation in Standards

The UK participation in its preparation was entrusted by Technical Committee NFE/35, Light metals and their alloys, to Subcommittee NFE/35/5, Wrought aluminium and aluminium alloys, which has the responsibility to:

  • Aid enquirers to understand the text;
  • Present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;

Cross-references

The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue.

A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application.

Compliance with a British Standard does not of itself confer immunity from legal obligations. This British Standard was published under the authority of the Engineering Sector Committee and comes into effect on 15 June 2001.

The BSI copyright date displayed in this document indicates when the document was last issued.

Amendments issued since publication

Amd No. Date Comments ISBN 0580370453

```
1、本文档共计 14 页,下载后文档不带水印,支持完整阅读内容或进行编辑。
2、当您付费下载文档后,您只拥有了使用权限,并不意味着购买了版权,文档只能用于自身使用,不得用于其他商业用途(如 [转卖]进行直接盈利或[编辑后售卖]进行间接盈利)。
3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。
4、如文档内容存在违规,或者侵犯商业秘密、侵犯著作权等,请点击“违规举报”。
文档评分
    请如实的对该文档进行评分
  • 0
发表评论