BRITISH STANDARD

BS EN 681-1:1996

Amendments Nos. 1 and 2 and Corrigendum No. 1

Elastomeric seals Material requirements for pipe joint seals used in water and drainage applications Part 1. Vulcanized rubber

The European Standard EN 681-1:1996, with the incorporation of amendments A1:1998 and A2:2002, has the status of a British Standard

NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW

British Standards BSEN681-1:1996

Committees responsible for this British Standard

The preparation of this British Standard was entrusted to Technical Committee PRI/70, Elastomeric seals for joints in pipework and pipelines, upon which the following bodies were represented:

• British Gas plc
• British Plastics Federation
• British Rubber Manufacturers' Association Ltd.
• Chartered Institution of Water and Environmental Management
• Clay Pipe Development Association Limited
• Concrete Pipe Association
• Ductile Iron Producers' Association
• Fibre Cement Manufacturers' Association Limited
• Malaysian Rubber Producers Research Association
• RAPRA Technology Ltd.
• Society of British Water Industries
• Water Companies Association
• Water Services Association of England and Wales

This British Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 November 1996

Amendments issued since publication

BSI 9 December 2002 Amd. No. Date Comments

• 10214 December 1998
• 1370626 July 2002

The following BSI references relate to the work on this standard:

• Committee reference PRI/70
• 141789 December 2002

Indicated by a sideline Draft for comment 92/38914 DC Corrigendum No. 1 ISBN 0580222861

[error]Page3-282111-url format illegal[/error]